| 1552 |
2005-11-18 |
I recently purchased a MP2QLR for the 50 from Rick's R/C. When I ... |
Over time and a lot of testing we have found that the MP2 50QLR w ... |
| 1494 |
2005-09-28 |
I recieve a MPII pipe some time ago as gift. I don't remember wh ... |
The 50QLR pipes are about 205mm long (the HR pipes are quite a bi ... |
| 1481 |
2005-09-14 |
I have purchased your MPII 50LRQ pipe about a month ago and I wa ... |
Sorry you had this problem. This problem has happened with some ... |
| 1355 |
2005-08-31 |
Hi Curtis. I would like to purchase 2 x loud MP2 50 pipes for a r ... |
I am sorry but we are now out of the Loud MP2 50s. The MP2 50 LR ... |
| 1411 |
2005-06-29 |
Hello Curtis,
I am interesting in getting a Muscle Pipe II LR ... |
I found the best overall flight performance was 1900 to 1950 on t ... |
| 1408 |
2005-06-29 |
I sent several e-mail to you, but you never answered me, then I b ... |
Yes, we have had several customers with this same problem. We wi ... |
| 1379 |
2005-06-24 |
Ok trying to get my TT50 in my raptor 50 V2 dialed in with a new ... |
The head speed sounds a little low for that setup. The Raptor 50 ... |
| 1363 |
2005-06-24 |
install your mp2q, but failed to notice the pre tap pressure hole ... |
It should still work fine. Several people have e-mailed me asking ... |
| 1391 |
2005-06-23 |
I am going to be getting a Century Raven 50 with an OS 50 Hyper. ... |
The MP2 50LR is the best choice. It works perfect at that ratio. ... |
| 1390 |
2005-06-22 |
I have just received a MPII 50Q for my Raptor 50v2 and am a bit d ... |
The loud pipes are a little lighter because they do not have the ... |
| 1401 |
2005-06-22 |
hi curtis,
just bought your pipe on cyber heli and put it on m ... |
The engine should not change setting during flight. If it is tun ... |
| 1400 |
2005-06-22 |
hello
I got a mp2 for rapter50 from heliproz on march 11 2005. t ... |
There have been a few reports of the MP2 50 cracking. Sorry that ... |
| 1314 |
2005-04-08 |
Curtis,
I installed old version Muscle PipeII on my raptor50 her ... |
I run my 50 machines (8.5 to 1 gear ratio) at about 1900 on the h ... |
| 1295 |
2005-04-08 |
Hi Curtis,
I have just fitted a MPII Q 8.5-9.0 ratio to my rap ... |
I think the problem has more to do with RPM. The 50 likes to tur ... |
| 1282 |
2005-02-16 |
Hi, I just received your new MP2Q pipe for my O.S.32 ( as a chris ... |
I do not recommend JB weld on the pipe, because the way you get J ... |
| 1273 |
2005-02-16 |
Hi Curtis!
very impresive flight in 3d masters 2004.
My questio ... |
When you say it is overheated, what do you mean?
The 50 size h ... |
| 1261 |
2005-01-13 |
I was contemplating putting a MP2 (quiet version) on my OS 50 in ... |
Honestly, I am not sure if this would affect the tuning of the pi ... |
| 1250 |
2005-01-08 |
Hi Curtis, this is not a question, I just wanted to tell you that ... |
Thank you very much for the nice comments on the pipe and I am gl ... |
| 1216 |
2004-11-29 |
Hi Curtis
I have a small problem, I have just purchased your MP2 ... |
Unfortunately, I have not found a way around cutting the canopy. ... |
| 1209 |
2004-11-17 |
Hi Curtis,
would a |
You could lengthen it 1/4 inch without a big change in performanc ... |
| 1207 |
2004-11-15 |
Curtis,
I have a Venture 50 with a os 50 sx and I am looki ... |
The Muscle Pipe 50 HR is designed for the higher JR gear ratios a ... |
| 1144 |
2004-10-15 |
Hi
How do you tell the differance between the old MP2 and the ... |
The newer MP2 pipes have the logo stamped on the header. The old ... |
| 1035 |
2004-10-15 |
Without seeming to be a little stupid what would happen if i was ... |
The MP2 50LR is tuned to low for that gear ratio and it would not ... |
| 1032 |
2004-10-15 |
Hi Curtiss,
I have run about 6 gallons through a new Sceadu 50 E ... |
The logo on the header block is the newest version.
It sounds ... |
| 1025 |
2004-10-15 |
hi
well i got a muscle pipe2 lr for my raptor 50 with an os50 ... |
The 30 and 50 Q pipes have my logo stamped on the header. The ol ... |
| 1022 |
2004-10-15 |
Curtis,
I have a raptor 50 v2 with a TJ pro Governor @ 1850 hs ... |
The OS 50 wants to run faster to stay happy. It is not really a ... |
| 1019 |
2004-10-15 |
I have a MP50Q/LR for the Evo (8.7 ratio). I'd like to try usin ... |
The mp250Q LR will work fine as long as you keep the engine RPM t ... |
| 1130 |
2004-09-06 |
Hey Curtis,
At OC Bobs Fun Fly this weekend, my MP2 (the origi ... |
Yes, we will replace defective pipes. Check the website to make ... |
| 1125 |
2004-09-06 |
Hi Curtiss,
i would like to know when do you send the MP2Q LR to ... |
Patrick, We have been out of stock on the MP2 50 pipes for a lon ... |
| 1118 |
2004-09-06 |
Hi Curtis,
Is there a way to tell whether an MP2 50 is the qui ... |
The quiet versions have the "curtisyoungblood.com" logo stamped o ... |
| 1113 |
2004-09-06 |
Hi. I noticed on your web site that MPII50Q pipes will be shippin ... |
I have found out that in this very small industry with the small ... |
| 1110 |
2004-09-06 |
I have a question concerning the Webra 52AAR and the MP2 pipe I h ... |
What gear ratio are you running? If you are running in the 8.5 r ... |
| 1031 |
2004-09-06 |
I ordered a MP 2 "Q" HR version from Heliproz. How do I know if I ... |
The Q version is the one with the logo stamped on the header. |
| 1066 |
2004-08-06 |
Hi Curtis
I have been using an OS50 in a Raptor 50 with a std. ... |
The LR is 16000 - 16500
The HR is 17300 - 18000
They will wor ... |
| 1055 |
2004-08-06 |
I have a 30 and 50 MP2 and would like to get the new quiet versio ... |
We had an exchange policy in place for the 30 and 50 pipes for se ... |
| 1082 |
2004-08-05 |
I just bought a new MP2 for OS50 and after about 4 flights the we ... |
The mp250 pipes we made in early 2004 had changes to make them qu ... |
| 1064 |
2004-08-05 |
i've got a raven 50 using an os 50 and i'd like to know which pip ... |
There is not real reason to use the 90 pipe on the 50s. It does ... |
| 997 |
2004-05-13 |
I have just bought a Muscle pipe 2 for my Raptor 50 with an Os 50 ... |
There should be a hole in the side of the header for the pressure ... |
| 992 |
2004-05-11 |
In reference to question #990, I am running the MP250Q LR on a ra ... |
I do the pinch test at idle. Pinch the fuel line off at idle and ... |
| 990 |
2004-05-10 |
got the new MPII for my os50 and it doesnt run worth a darn, the ... |
I am very surprised, I have tended to have the exact opposite rea ... |
| 963 |
2004-04-22 |
Hello Curtis,
I have a Hirobo Sceadu EVO 50 with OS50, and you ... |
The MP2 50Q will work fine with a governor. I wouold suggest aro ... |
| 953 |
2004-04-22 |
Hi Curtis,
Ive got a question regarding a MP2-50 (the original n ... |
The HR is shorter than the LR.
These are the lengths for the ... |
| 959 |
2004-04-20 |
I have heard the new MP2LRQ for the os 50 are coming apart. Is t ... |
I saw the same thing on Runryder and the gentleman e-mailed me ab ... |
| 942 |
2004-04-13 |
hi i have sent a mp2 50 back for exchange for mp250 quiet plus $2 ... |
Darren,
We just got the pipes in late last week (later than th ... |
| 930 |
2004-04-08 |
Hi Curtis:
I have a Muscle Pipe 2 50 size. The problem is the ... |
The original MP2 50 pipes were threaded together in some sections ... |
| 927 |
2004-04-07 |
I'm sure this isn't the first time you've been asked -- I see tha ... |
Actually they just came in yesterday. We are doing the QC, check ... |
| 903 |
2004-03-19 |
do you think you will still get out mp2 50lr out by the end of ma ... |
We expect to receive the MP250Q pipes in about 1 week. So they s ... |
| 897 |
2004-03-15 |
I wondered if you would still sell the louder mp 2 or even sell t ... |
We will be reselling the returned MP2 50 pipes a little later thi ... |
| 875 |
2004-03-03 |
DEAR CURTIS
I HAVE A PROBLEM WITH MY OS50SXH ENG |
Under 1 turn does seem a little strange. So you might want to ch ... |
| 849 |
2004-02-19 |
Ihave a?about the mussel pipe 2 for the os fifty. You have one fo ... |
With the 8.8 gear ratio you want the LR (low gear ratio) version ... |
| 847 |
2004-02-19 |
Hi Curtis!
I purchased a MP2 50 some weeks ago in a hobby shop ... |
Since you ordered from an online shop instead of a local shop ple ... |
| 846 |
2004-02-16 |
HELLO CURTIS:
I JUST GOT MP2 FOR RAPTOR 50 AND I HAD TO CLOSE TH ... |
I am not sure about the temperature since I do not use a temperat ... |
| 843 |
2004-02-12 |
Hi Curtis,
i recently bought a MP250 from a friend. It works g ... |
The LR version of the pipe is a little longer than the HR version ... |
| 803 |
2004-01-26 |
I have used the MP1/TT50 combo on my Raptor 50 with great success ... |
The MP2 is a tuned system. But I have broadened the tuning affec ... |
| 804 |
2004-01-26 |
Ref Question 803. Thank you for your quick response. I was runn ... |
The pipe runs great at 16,500 - 16,800 will work fine with the MP ... |
| 794 |
2004-01-22 |
Curtis, I have purchased a Muscle Pipe 2 for my OS50SXH and it is ... |
We have had people, especially people outside the US, who have no ... |
| 791 |
2004-01-19 |
Ok so now I have the "loud" mpII 50 LR for my R50 you bring out a ... |
Don't worry, we will have an exchange policy in place by the end ... |
| 767 |
2004-01-05 |
I have recently purchased a JR Venture 50 with an OS 50 SX and a ... |
Yes, on the Venture 50 the side frames cover up the bottom of the ... |
| 760 |
2003-12-29 |
I have a raptor 50v2 with a os 50 sxh can I use the mp2 50 hr wit ... |
The HR version of the MP2 50 will want to run the engine faster t ... |
| 759 |
2003-12-29 |
I've just install the MP2 on my raptor 50 with TT50 and just just ... |
On a stock Raptor 50 (gear ratio 8.5 to 1) you want to run about ... |
| 720 |
2003-11-26 |
i have recently purchased your mpII for my venture 50 and the bol ... |
Sorry you had problems with the pipe threads. Is it possible the ... |
| 699 |
2003-11-10 |
I have just purchased a 50 size Muscle Pipe 2 and initially fitte ... |
The insert was added to the 50 to reduce the noise but not change ... |
| 693 |
2003-11-09 |
Have just purchased two Mp2 50 pipes for the 9-1 Ratio they work ... |
We have inserts that can be installed in the exhaust of the pipe ... |
| 697 |
2003-11-09 |
HI CURTIS
IS IT POSSABLE TO RUN THE HIGH RATIO MP2 WITH AN OS50 ... |
You can run the high gear ratio pipe on the Sceadu, you will simp ... |
| 689 |
2003-11-05 |
I |
In some cases running the pipe a little shorter will fix the rich ... |
| 684 |
2003-11-02 |
Hello,
One can grind an engine with MusclePipe? I have the pro ... |
I assume you are asking if you can use the MP2 50 with the Raptor ... |
| 658 |
2003-11-02 |
Hi,
About the MP2-50, I am running an OS-50 in my Raptor 30/50, ... |
If you are using the 9.5 to 1 ratio then you want to run ther MP2 ... |
| 507 |
2003-05-23 |
Any new information on the release of the .50 MP2? It is almost ... |
The 30 and 50 size have been delayed a little from the manufactur ... |
| 435 |
2003-04-14 |
Curtis,
I can't tell you how excited I am to find out that you a ... |
Glad to hear you are excited about the 50 MP2. We still plan to ... |
